Cisco Webex 840 Quick Reference Manual

Your phone
1. Power button
2. Barcode scanner (840S only) and
programmable button (by default Emergency)
3. Receive speaker and front camera
4. Programmable button (by default PTT)
5. Microphone
6. Headset jack, USB charging port, and speaker
Programmable buttons (by default: Volume up,
7.
Volume down, and the lower button is Scanner
(for 840S) or No action (for 840))
8. Rear camera, flash lens/torch, and rear
microphone
9. Charger contacts, battery latch, and
rechargeable battery pack
Copyright © 2022 Cisco Systems, Inc. All rights reserved.
Webex Wireless Phone 840 and 840S quick reference guide
Turn on your phone
Press and hold the
vibrates and the first screen displays.
Unlock your phone
1. If the phone screen is in sleep mode, briefly
press the
Power
2. Swipe up on the
3. Enter your PIN or password and tap
Lock your phone
Briefly press the
Turn off your phone
1. Press and hold the
2. Tap Power off
Make a call from the keypad
1. Access the
Cisco Phone
2. (Optional) If your phone has multiple lines,
access the desired line.
3. Tap
Keypad
4. Enter a phone number.
5. Tap
Answer/Call
button until the phone
Power
button.
Lock screen.
Enter
button.
Power
button.
Power
.
app.
.
.
Answer a call
Swipe to the right.
Answer/Call
Mute your microphone
1. From the active call screen, tap
2. To unmute your microphone, tap
again.
.
Change your audio option
1. From the active call screen, tap
.
options
2. Select the desired available audio option:
,
Headphones Speaker
or .
Phone
Hold a call
1. From the active call screen, tap
2. To return to the held call, tap
Transfer a call to another person
1. From the active call screen, tap
2. Tap
Transfer to number
3. Enter the number to call or select an entry
from your recent Calls
4. Tap .
Transfer
.
Mute
Mute
Audio
, ,
Bluetooth
.
Hold
Hold .
.
More
.
.
March 2022