Adjust The Volume During A Call; Access The Settings App - Cisco 840 User Manual

Settings
Step 3
Choose one of the following based on your phone's software version:
• For release 1.2(0), tap Settings.
• For release 1.3(0) or later, tap User settings.
Step 4 Use the Enable autodial slider to either enable

Adjust the volume during a call

If the sound in your handset, headset, or speakerphone is too loud or too soft, you can change the volume
while you are on a call. When you change the volume during a call, the change only affects the speaker you're
using at the time. For example, if you adjust the volume while you're using a headset, the handset volume
doesn't change.
Procedure
Press the programmed Volume up and Volume down buttons to adjust the volume while you are on a call.

Access the Settings app

If enabled by the administrator, your phone has a Settings
Bluetooth
If your administrator set up the phone with a smart launcher, then the Settings app isn't available. However,
you can still access some volume and display settings from the quick settings.
Note
Procedure
Access the Settings
®
connections, sound, and display.
If enabled, to access the Settings app from any screen, swipe down on the status bar at the top of the screen
and tap the Settings gear icon.
If enabled, you can also access the Settings
app.
Adjust the volume during a call
or disable the autodial feature.
app that lets you customize settings such as
app from the Launcher screen. Swipe up to open the Launcher.
Cisco Wireless Phone 840 and 860 User Guide
109