Clean The Scanner Window - Cisco 840 User Manual

Clean the scanner window

Note
• If not already done, and if available, perform a test scan of a barcode.
Procedure
Step 1
If your phone is password protected, unlock the phone.
Step 2 Point the barcode reader 1–18 inches (2.5–46 centimeters) from the barcode that you want to scan.
Step 3
Press and hold the programmed Scanner button with the light shining across the entire barcode symbol until
the light turns off and you hear a beep.
Related Topics
Clean the scanner window
If the scanner isn't working properly, clean the scanner window.
Caution
Note
Procedure
Step 1 Spray glass cleaner onto a soft cloth.
Step 2 Wipe the scanner window.
Cisco Wireless Phone 840 and 860 User Guide
104
By default, the top-left button of the Cisco Wireless Phone 860S is set to Scanner.
By default, the bottom-left button of the Cisco Wireless Phone 840S is set to
Scanner.
Change button function, on page 100
Test scan a barcode, on page 102
Don't spray cleaner directly on the scanner window.
You may also clean the scanner with a monitor wipe.
Barcode app