Duct Mounting - Honeywell Satellite XT 9602-0400 FTT Manual To Operation

2.3

Duct Mounting

Observe the guidelines for installation of the instrument. For assembly and installation of
the sensor extension see the schematics below and overleaf.
2.3.1 Connecting the Sensor Extension to the Instrument
1. Connect the Socket (A) to the plug in the sensor compartment located at the bottom of
the Satellite XT. The groove of the Socket must face to the front.
2. Screw in the Internal Cap (B) and fasten it hand-tight.
3. Insert the Sensor Housing (C) with the nose of the Bayonet Catch facing to the front.
Lock the Bayonet Catch with a quarter-turn right.
1
A
B
C
D
Satellite XT FTT Versions
2
3
Installation and Start-Up - Section 2
A Socket with Groove
B Internal Cap
C Sensor Housing with Bayonet Catch
D Extension Cable to the Sensor
2-3