Honeywell Satellite XT 9602-0400 FTT Manual To Operation page 30

M A I N T E N A N C E
R E S E T D E V I C E
s e l e c t : 6
R E S E T D E V I C E
A R E Y OU S U R E ?
< e s c > t o e x i t
S E N S OR WA RM - U P !
1 . 2 3
S a t e l l i t e X T
A s H 3
0 . 0 0
M A I N T E N A N C E
S E R V I C E
s e l e c t : 7
S E R V I C E
P A S SWOR D : * * *
p l e a s e e n t e r
Satellite XT FTT Versions
Offers the possibility to perform a "warm start" of the
instrument. Actuate the <set> key to select.
o f 7
This screen is to confirm that a software reset should
be performed. Actuate the <set> key to confirm or use
the <esc> key to exit.
!
A sensor warm-up is performed and this screen is
shown until the displayed value is zero, except for
Oxygen sensors. The warm-up time depends on the
p p m
type of sensor.
The instrument will automatically switch to the
Monitoring Mode when the sensor service procedure is
finished.
p p m
This submenu is used exclusively by trained Service
Personnel. The functions are password protected.
o f 7
!
Maintenance - Section 4
Reset Device
Are You Sure ?
<Sensor Warm-Up Condition>
<Normal Monitoring Condition>
Service
4-8