Honeywell Satellite XT 9602-0400 FTT Manual To Operation page 26

M A I N T E N A N C E
A L A RM R E S E T
s e l e c t : 2
A L A R M R E S E T
A L A RMS O F F ?
< s e t > t o c o n f i r m
M A I N T E N A N C E
A L A RM / WA R N T E S T
s e l e c t : 3
A L A R M / W A R N T E S T
S E T A L A RM 1 ?
s e l e c t :
S E T A L A R M 1
A l a r m 1 s e t !
< e s c > t o e x i t
A L A R M / W A R N T E S T
S E T A L A RM 2 ?
s e l e c t :
S E T A L A R M 2
A l a r m 2 s e t !
< e s c > t o e x i t
continued
Satellite XT FTT Versions
Alarm Reset allows the user to reset the alarm
indication of latched alarms. An according message is
sent to external alarm devices.
o f 7
Use the <set> key to enter and follow the dialogue
displayed at the bottom of the screen. Actuate the
<esc> key to exit.
Actuate the <set> key to cofirm the reset of alarm
indication with latching alarm.
For non-latching alarms, alarm indication will be reset
automatically..
Used to verify the alarm function of any associated
external device by simulating an Alarm 1, Alarm 2, and
warning condition.
o f 7
Use the <set> key to select or use the cursor keys
<up> and <down> to continue in the menu.
Allows the user to simulate an Alarm 1 condition.
Actuate the <set> key to enter.
1 o f 3
?
An Alarm 1 message is transmitted to the network.
Instruments with relay option: the according relay is
! activated. Use the <esc> key to exit.
Allows the user to simulate an Alarm 2 condition.
Actuate the <set> key to enter.
2 o f 3
?
An Alarm 2 message is transmitted to the network.
Instruments with relay option: the according relay is
activated. Use the <esc> key to exit.
!
Maintenance - Section 4
Alarm Reset
Alarms Off ?
Alarm/Warn Test
Set Alarm 1 ?
Alarm 1 set !
Set Alarm 2 ?
Alarm 2 set !
4-4