Honeywell Satellite XT 9602-0400 FTT Manual To Operation page 48

R E L A Y S
R E L A Y S T A T E
s e l e c t : 1
R E L A Y S T A T E
A L A RM 1 R E L A Y
s e l e c t :
R E L A Y S T A T E
A L A RM 2 R E L A Y
s e l e c t :
R E L A Y S T A T E
F A U L T R E L A Y
s e l e c t :
R E L A Y S T A T E
A L A RM 1 R E L A Y
s e l e c t : 1
A L A R M 1 R E L A Y
D E E N E RG I Z E D / NO
s e l e c t :
A L A R M 1 R E L A Y
E N E RG I Z E D / N C
s e l e c t :
Satellite XT FTT Versions
Defines the Alarm 1 Relay to be energized (normally
closed
contact).
Actuate the cursor keys <up> or <down> to change.
o f 3
Actuate the <set> key to confirm or <esc> to exit.
Allows to set the Fault Relay state.
1 o f 3
2 o f 3
Allows the user to set the Alarm 1 Relay state.
Use the <set> key to enter.
The instrument will show the actual setting.
3 o f 3
Defines the Alarm 1 Relay to be deenergized (normally
open contact).
Actuate the cursor keys <up> or <down> to change.
Actuate the <set> key to confirm or <esc> to exit.
Defines the Alarm 1 Relay to be energized (normally
o f 3
closed contact).
Actuate the cursor keys <up> or <down> to change.
Actuate the <set> key to confirm or <esc> to exit.
Allows the user to set the Alarm 2 Relay state.
Use the <set> key to enter.
The instrument will show the actual setting.
1 o f 2
Defines the Alarm 2 Relay to be deenergized (normally
open contact).
Actuate the cursor keys <up> or <down> to change.
2 o f 2
Actuate the <set> key to confirm or <esc> to exit..
Configuration - Section 6
Fault Relay
Alarm 1 Relay
Deenergized / NO
Energized / NC
Alarm 2 Relay
Deenergized / NO
6-14