8.4
Network Terminators
Network Terminators are designed to provide electrical termination for twisted pair
channels. They are passive devices and do not require electrical power.
In a free topology FTT-10 segment, one Network Terminator type 9630-0441 is required
and may be located anywhere on the segment.
In a bus topology FTT-10 channel, two Network Terminators type 9630-0443 are required,
one located at each end of the bus.
Technical Specifications
Network
wiring topologies
Physical Dimensions
size
weight
Mounting
Housing Protection Class
Operating Conditions
temperature
humidity
Part Number
FTT-10
FTT-10 Bus Topology
Satellite XT FTT Versions
Reference Information - Section 8
Standardized LonTalk™ protocol
free, e.g. Bus, Star, Loop, or mixed
18 x 58 x 60 mm
0.7" x 2.3" x 2.4"
40 g
1.4 oz
DIN rail
IP 20
-20 °C ... +50 °C
-4°F ... +122 °F
0 ... 95 % r.h.
9630-0441
9630-0443
(W x H x D)
(W x H x D)
8-4