Summary of Contents for Honeywell OneWireless XYR 6000
Page 1
OneWireless XYR 6000 Transmitter Professional Installation Guide 34-XY-25-47 Revision 3 September 2012 Honeywell Process Solutions...
Page 2
In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The information and specifications in this document are subject to change without notice.
Page 3
This document must be adhered to for all installations of the Honeywell OneWireless XYR 6000 Transmitters. Honeywell does not recommend using devices for critical control where there is a single point of failure or where single points of failure result in unsafe conditions. OneWireless is targeted at open loop control, supervisory control, and controls that do not have environmental or safety consequences.
For more contact details for Europe, Asia, North and South Americas, please see back page. World Wide Web Honeywell Solution Support Online: www.honeywellprocess.com Elsewhere Call your nearest Honeywell office. See back page for details. Training Classes Honeywell Automation College: http://www.automationcollege.com OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide...
Page 5
Chassis Ground: Identifies a connection to the chassis or frame of the equipment shall be bonded to Protective Earth at the source of supply in accordance with national and local electrical code requirements. continued Revision 3 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
Page 6
ACMA and RSM. This mark is equal to the CE Mark used in the European Union. N314 directly under the logo is Honeywell’s unique supplier identification number. The ANATEL mark is certification trade mark registered to the Brazilian Agency of Telecommunications (in Portuguese, Agência...
MIDDLE EAST ............................8 2.6.5 Central and South America ........................8 XYR 6000 TRANSMITTER GENERAL DESCRIPTION ......... 9 Intended Used ..........................9 XYR 6000 Transmitter Diagrams ....................9 Revision 3 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
Page 8
50016195-002 – Transmitters with Intrinsically Safe FSSS Radios ........... 26 Internal FCC/IC Labels ........................ 27 Internal Japan Ministry of Internal Affairs and Communications Label ........ 27 External Brazil Anatel Label ....................... 27 viii OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
Page 9
11.2.4 European Union Certification (CE-mark) ....................31 11.2.5 Japan Technology Institution of Industrial Safety (TIIS) Certification ............ 31 REFERENCE DOCUMENTS ................32 12.1 OneWireless reference documentation ................. 32 Revision 3 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
Page 10
Figure 4-1 Dimensions of a typical XYR 6000 Transmitter with the Right-angle -2 dBi Integral Antenna Option ..............................13 Figure 6-1 Comparison of instruments with -2 dBi Integral Antenna (left) and 4 dBi Integral Antenna ..17 Figure 6-2 Remote Antennas........................17 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
This document outlines professional installation requirements for the Honeywell XYR 6000 Transmitter for the Honeywell OneWireless Network. Professional installation is required to comply with certification agency and legal requirements. This document must be adhered to for all installations of the Honeywell OneWireless XYR 6000 Transmitters.
1.5. Abbreviations & Definitions 1.5 Abbreviations & Definitions The term Honeywell XYR 6000 Transmitter will be used to describe the composite unit which includes the Honeywell FHSS or DSSS RF Module and all subassemblies housed within the XYR 6000 Transmitter enclosure.
Page 14
Japan Technology Institution of Industrial Safety TNTC Thailand National Telecommunications Commission Transmit Wi-Fi Wireless Local Area Network based on IEEE 802.11 Specifications WNSIA Wireless Network for Secure Industrial Application OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
Furthermore, when using integral antenna(s) the XYR 6000 unit must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons. Revision 3 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
2.4. Japan MIC Identification and Certification Numbers 2.4 Japan MIC Identification and Certification Numbers 2.4.1 DSSS and ISA100 Radios • Honeywell XYR 6000 Transmitter DSSS Radio Module and ISA100 Radio Module Identification • Honeywell Identification for DSSS Intrinsically Safe RF Modules: 50025034-001 •...
Ireland Switzerland Italy United Kingdom 2.6.4 MIDDLE EAST Country ISO 3166 2 letter code Kuwait Oman 2.6.5 Central and South America Country ISO 3166 2 letter code Brazil OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
3. XYR 6000 Transmitter General Description 3.1 Intended Used The XYR 6000 Transmitter is a key component of the Honeywell Wireless Network for Secure Industrial Application (WNSIA). These transmitters are available for various sensor types including Digital Inputs, Temperature, High Level Analog Inputs, Pressure and Corrosion. The XYR 6000 Transmitter uses a low- powered FHSS or DSSS or ISA100 2.4 GHz radio to communicate with Radio Infrastructure and Gateway...
Module Transmit Power Maximum: 20 dBm (Maximum transmit power will vary by channel) Receive Sensitivity -97 dBm (typical) Table 4-1 Specifications of FHSS Radio Module in XYR 6000 Transmitter OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
TX power setting requirements. Only the specified TX power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for XYR 6000 Transmitter installations. Revision 3 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
These weights do not include remote cables or antennas. Add 8.0 lbs (3.6 kg) to any transmitter equipped with the stainless steel housing option (A3 or SH option). OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
4. Product Specification 4.7. Dimensions 4.7 Dimensions Figure 4-1 Dimensions of a typical XYR 6000 Transmitter with the Right-angle -2 dBi Integral Antenna Option Revision 3 OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
Part Number Type (GHz) (dB) 50018278-001 400 Series N male to N male 50018278-003 400 Series N male to N male 50018278-010 400 Series N male to N male OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
The lightning surge arrestor must be properly grounded in order to perform per specification. Connecting to local ground using a No. 12 (4 mm2) copper conductor is recommended. See the installation manual for other details. Figure 5-1 Lightening Surge Arrestor (Altelecon AL-NFNFB-9) 50018279-090 Revision 3 OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
Table 6-1 is approved for use only in Japan. It is not approved for other locations. This antenna is not available through Honeywell and must be purchased directly from L-COM. 3. Anatel for Brazil does not allow the use of antenna gains greater than 6 dBi.
The XYR 6000 Transmitter is available with 8 dBi Omnidirectional or 14 dBi Directional Remote Antennas for all locations. A 14 dBi sectional antenna is available for use in Japan. Revision 3 OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
EIRP(dBm) = Radio TX Power (dBm) – Cable Loss (dB) + Antenna Gain(dBi) Antenna gain is expressed relative to a (theoretical) isotropic reference antenna (dBi). OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
2400-2454 MHz Point France Do not use 2454-2482.5 MHz FCC, IC, ACMA ETSI, TNTC Point 14 dBi France Direction Remote Multi- 2400-2454 MHz Point France Do not use 2454-2482.5 MHz Revision 3 OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
14 dBi Direction Remote ETSI, TNTC, KCC Multi- Point France 2400-2454 MHz France Do not use 2454-2482.5 MHz 2485-2499 MHz Point 14 dBi Remote Japan 19.9 Sectional Multi- Point OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
Page 31
Honeywell supplied antennas of greater than 6 dBi gain. Other Anatel approved antennas can be used in Brazil, consult local suppliers for availability. When using non-Honeywell supplied antennas, adjust TX Power such that the EIRP limit given in Table 7- 2 is not exceeded.
D 2 3 1 0 or D 2 9 0 3 14 dBi directional D 1 0 1 0 or D 2 9 1 0 10+10 with suppressor OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
D 2 9 0 3 14 dBi directional D 1 0 1 0 or D 2 9 1 0 10+10 with suppressor No remote antenna or cables A 0 0 0 0 option Revision 3 OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
Page 34
Table 5-2. 3. TX Power is set by the Honeywell factory producing the XYR 6000. The factory set value for TX power is determined by the customer’s model number selections in the Model Selection Guide Table III for antenna type, cables and the lightning suppressor along with the customer’s selection in Table V for...
The TX Power setting may be changed via the Authentication Device or Provisioning Device when a special application (app) is installed. This app is considered to be Honeywell sensitive material and is made available only to the qualified Professional Installer. Due to radio approval body regulations, changing the TX Power setting is only available if the professional installer option has been explicitly enabled on your Authentication Device or Provisioning Device.
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC ID: S5750025034 / IC: 573I-50025034 OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
This label is used only on XYR 6000 DSSS and ISA100 instruments intended for installation in Brazil. There is no Anatel approval or certification for FSSS radios for Brazil. 50016195-004 Revision 3 OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
When using integral antenna(s) the XYR 6000 Transmitter unit must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20 cm from all persons. OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3...
Technical Regulations Conformity Certification for 2.4 GHz band wide-band, low-power data communication system (Item 19 of Article 2 Paragraph 1). 11.1.7 Kuwait Ministry of Communications (KMOC) • Documentation received via Kuwait Oil Company (KOC) Revision 3 OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
Division 2, Class II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations • Temperature code: T4 (135°C) based on the maximum specified ambient of 85°C. OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3 September 2012...
Honeywell OneWireless System Administration Guide Honeywell OneWireless Field Network Dictionary OneWireless Builder Parameter Reference OneWireless Builder User’s Guide These reference documents may be found on the Honeywell HPS website for Wireless Instrumentation. www.honeywellprocess.com/en-US/explore/products/wireless/Pages/default.aspx OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3...
Page 43
1.1.5 Revision 3 OneWireless XYR 6000 Transmitter Professional Installation Guide September 2012...
Page 44
ASIA PACIFIC EMEA NORTH AMERICA SOUTH AMERICA (TAC) Honeywell Process Solutions, Honeywell Process Solutions, Honeywell do Brasil & Cia hfs-tac- Phone: + 80012026455 or +44 Phone: 1-800-423-9883 Phone: +(55-11) 7266-1900 support@honeywell.com (0)1202645583 Or 1-800-343-0228 FAX: +(55-11) 7266-1905...