Inlet
Outlet
Inlet
Outlet
Extractive Modul XT
Pyrolyzer XT with bypass for C5F8
When the Pyrolyzer is used with C5F8, the flow needs to be adjusted at the outlet of the Extractive
Module XT to 0.5 l/min or 30 l/h.
30 l/h
0,5 l/min
On the underside of the Extractive Module XT is the interconnection to the Pyrolyzer Module XT, and
next to it, two small holes which gives access to two pushbuttons. The left hand button will increase the
flow, and the right hand button will decrease it.
Flowmeter
The adjustment is required as the internal flow resistance is different to the other types of the Pyrolyzer
Module XT and this resistance would damage the Extractive Module XT.
Satellite XT FTT Versions
Pyrolyzer Module XT - Section 10
Satellite XT
10-5