3.3.
Mounting
3.3.1. DIN Rail Mounting
If the STT700 is to be installed on DIN rail option then the main considerations are electrical
connections and mechanical fixing. Electrical connections are identical to the bench test instructions
except that thermocouple wire is likely to be used with thermocouples. Mechanical fixing of the
module is by means of the snap-in DIN rail clips which are screwed to the bottom lugs of the module.
Figure 5: DIN Rail Mounting
The DIN rail needs to be connected to Earth Ground per Section
0
below. It is generally required by
regional wiring, safety and installation codes that these units be mounted in a suitable enclosure such
as a metal cabinet or box which is locally connected to Earth Ground.
STT700 Temperature Transmitter User's Manual
Page 10
Revision 1