Table of Contents
Advertisement
Installation
2.7.8 ANN-LED Annunciator Module
The ANN-LED annunciator modules provide LED annunciation of general system faults and input
zones when used with a compatible FACP. The ANN-LED module provides alarm (red), trouble
(yellow) and supervisory (yellow) indication for up to ten input zones.
2.7.8.1 ANN-LED Board Layout
Figure 2.22 illustrates the ANN-LED board showing locations of screw terminals for
connection to the FACP and the DIP switches for selecting the ANN-BUS ID number.
2.7.8.2 Specifications
•
Max. ANN-BUS Voltage: 24 VDC
•
Max. Current:
•
Operating Temperature: 32
•
For indoor use in a dry location only
2.7.8.3 Mounting/Installation
Install the ANN-LED Module as described in the documentation supplied with the annunciator.
42
ANN-BUS (ID#)
Address DIP switch
ANN-BUS Connector
Figure 2.22 ANN-LED Board Layout
Alarm: 68 mA
Standby: 28 mA
o
F to 120
o
o
o
F (0
C to 49
C)
MRP-2002 & MRP-2002E PN 53049:A1 5/01/2008
ANN-BUS Devices
Advertisement
Table of Contents
