Master Programming Level
PROGRAMMING
1=ANN-RLY OPTIONS
2=ANN-LED OPTIONS
ANN-BUS Screen #3
MRP-2002 & MRP-2002E PN 53049:A1 5/01/2008
3.5.7.7 ANN-RLY Options
Pressing 1 for ANN-RLY Options while viewing ANN-BUS Screen #3 will cause the following
screen to be displayed:
1=RELAY 1
2=RELAY 2
3=RELAY 3
The ANN-RLY module provides ten Form-C relays which can be programmed for various
functions. The initial screen displays Relays 1 through 3. Pressing the down arrow key will
display the remaining relays for this module.
To program any of the ANN-RLY relays, while viewing the appropriate ANN-RLY Option
screen, press the number key corresponding to the relay to be programmed. Following is a list
of the available programming options for each relay:
•
General Alarm
•
General Trouble
•
General Supervisory
•
General Pre-Discharge
•
Pre-Discharge Release 1
•
Pre-Discharge Release 2
•
General Discharge
•
Discharge Release 1
•
Discharge Release 2
•
AC Loss
•
Waterflow Delay
•
General Abort Release
•
Abort Release Release 1
•
Abort Release Release 2
•
Future Use
•
Future Use
•
Future Use
•
Input Zone 1
•
Input Zone 2
•
Input Zone 3
•
Input Zone 4
•
Input Zone 5
•
Input Zone 6
ANN-RLY OPTIONS
IN ZONE 1
IN ZONE 2
IN ZONE 3
ANN-RLY Options Screen
Programming
77