Daylight Savings; History; Print - Honeywell fire-lite alarms MRP-2002E Manual

Read Status
READ STATUS

1=PRINT

2=ANN-BUS
Read Status Screen #4
MRP-2002 & MRP-2002E PN 53049:A1 5/01/2008

4.15.8 Daylight Savings

Pressing 2 while Read Status Screen #3 will cause the following screens to be displayed:
ENABLED
START MONTH
START WEEK
END MONTH
END WEEK
These screens allow the operator to view settings that have been programmed for Daylight Savings
Time.

4.15.9 History

Pressing 3 while viewing Read Status Screen #3 will display the following screens:
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
The operator can view all events which have been stored in the history file, only alarms or other
events, such as troubles or supervisories, by pressing the corresponding number key.
4.15.10 PRINT
To print control panel data, press 2 while viewing Read Status Screen #4. This allows printing to
the printer connected to the ANN-S/PG module. The following screens will be displayed:
1=HISTORY
2=WALKTEST LOG
3=EXIT PRINTING
Pressing 1 allows the user to print the History file which will detail all of the system activities since
the file was last cleared from memory.
DAYLIGHT SAVINGS
DAYLIGHT SAVINGS
HISTORY
PRINT
Operating Instructions
YES
MAR
WK 2
NOV
WK 1
97