Read Status
4.15.4 Cross Input Zones
Pressing 1 while viewing Read Status Screen #2 will display the following screens:
READ STATUS
1=CROSS INPUT ZONES
2=ON-BOARD RELAYS
3=SYSTEM SETTINGS
Read Status Screen #2
Press 1 for Release Circuit 1 or 2 for Release Circuit 2. A screen similar to the following will be
displayed:
The Cross Zones Release screen displays the zones that have been cross-zoned. In this example,
Zone 1 is cross-zoned with Zone 4.
4.15.5 On-Board Relays
Pressing 2 while viewing Read Status Screen #2 will display the following screen:
This screen allows the operator to view the programmed option for each relay.
MRP-2002 & MRP-2002E PN 53049:A1 5/01/2008
CROSS INPUT ZONES
1=RELEASE 1
2=RELEASE 2
Cross Input Zone Screen
CROSS ZONES REL 1
X 1 2
NONE
NONE
Cross Zones Release Screen
ON-BOARD RELAYS
RELAY 1
RELAY 2
RELAY 3
SUPERVSRY
Operating Instructions
ALARM
TROUBLE
95