Honeywell fire-lite alarms MRP-2002E Manual page 51

Master Programming Level
INPUT ZONE
1=ENABLED
2=TYPE
3=OUTPUT CIRCUIT MAP
Edit Input Zone Screen #2
MRP-2002 & MRP-2002E PN 53049:A1 5/01/2008
To change the programming for the displayed zone, press the keyboard 'down' arrow key to
view the Edit Zone screens.
The following examples show the editing of Input Zone 1:
1=ENABLED
2=TYPE
3=OUTPUT CIRCUIT MAP
1=NOUN/ADJECTIVE
2=DESCRIPTION
********************
Enable/Disable Zone
To Enable or Disable the zone, press the 1 key while viewing the Edit Input Zone Screen #2.
Each press of the key will toggle the screen between Enabled Yes and Enabled No. If Enabled
No is selected, the zone will be disabled by the control panel, preventing the circuit from
reporting alarms and troubles to the panel. The control panel LCD will display the zone which
has been disabled and FACP will turn on the Trouble indicator.
Type
To select the type of zone being programmed, press the 2 key while viewing the Edit Input Zone
Screen #2. This will cause the control panel to display the following Zone Type Screen:
1=PULL STATION
2=N/A
3=MANUAL RELEASE
INPUT ZONE 1
2-WIRE SMOKE
Edit Input Zone Screen #2
INPUT ZONE 1
Edit Input Zone Screen #3
ZONE 1 TYPE
Zone Type Screen #1
Programming
YES
51