Guarantee; Repair Service - Grizzly EKS 1835 QT Instructions For Use Manual

of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running
idle).
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
This device is designed for opera-
tion on a power supply network with
a system impedance Zmax at the
transfer point (domestic connection)
of a maximum of 0.170 Ohms.
The user must ensure that the device
is operated only on a power supply
network that fulfils this requirement.
If necessary, the local power supply
company can be asked for the sys-
tem impedance.

Guarantee

This unit has a guarantee period of 36
months, or 12 months for units used on a
commercial basis or for replacement units
according to the statutory regulations.
Damages, which can be attributed to
natural wear, overloading or inappropriate
use, are excluded from the guarantee.
Certain component parts are subject to a
normal wear and are excluded from the
guarantee. In particular, these include:
Saw chain, chain bar, sprocket chain
wheel and carbon brushes, provided that
the complaints cannot be attributed to
flaws in the materials themselves. Also,
all damage to the machine, the saw chain
and the chain bar, which can be attributed
to inadequate lubrication, are excluded
from the guarantee.
Furthermore, a condition of the guarantee
services is that the maintenance intervals,
indicated in the operating instruction, have
been adhered to and the instructions on
the cleaning, care and maintenance have
been followed. Damages, which originate
due to material or manufacturer faults, will
be repaired free of charge by replacement
delivery or repair. This is conditional upon
the device being returned in one piece
complete with proof of purchase and guar-
antee to our service centre..

Repair service

Our Service-Center will also carry out any
non-guarantee repair work for a charge.
We will be happy to give you a quote.
We will only work on units that have been
sent in with the appropriate packaging,
postage paid.
The transportation risk is borne by the
sender.
Caution: Please, in no case, send defec-
tive devices with filled oil tank. Completely
empty the tank. Possible material dam-
ages (oil runs out if device is placed on its
side or upside down!) and/or fire damages
during transport are borne at the expense
of the sender.
Devices sent in with freight collect - by
bulk freight, express or with other spe-
cial freight - are not accepted.
We will dispose of tools free of
UK
charge..
155