Makita DCU603 Instruction Manual page 24

3. Lock the other rear wheel in the same way.
4. Move the rear wheel back and forth or left and
right slightly to make sure it is locked.
To release the rear wheel lock, rotate the rear wheel
lock 90° as shown in the figure.
Fig.48
► 1. Rear wheel lock
NOTE: The rear wheels can be fixed in 4 different
directions as shown in the figure.
Fig.49
Neutral change lever
WARNING:
never disable the support brake of the machine
with the neutral change lever. Since the support
brake of the machine is disabled, the machine may
1
move unintentionally and cause an accident or per-
sonal injury.
WARNING:
change lever to its original position after pulling
the lever outward.
NOTICE:
move the machine manually by pulling the neu-
tral change lever outward to disable the support
brake.
NOTICE:
move the neutral change lever.
You can unlock the support brake of the machine using the
neutral change lever. To unlock the support brake, lock the
brake lever, and then pull the neutral change lever outward.
Fig.50
► 1. Neutral change lever
NOTICE:
lever, lock the brake lever. Make sure that the
neutral change lever is fully returned as shown in
the figure.
Fig.51
► 1. Neutral change lever
24 ENGLISH
Unless absolutely necessary,
Be sure to return the neutral
In case of an emergency, you can
You need to lock the brake lever to
Before returning the neutral change
1
1