Use The 3.5 Mm Audio Cable; Headset Power; Check Your Remaining Cisco Headset 730 Battery Life - Cisco Headset 730 User Manual

Hide thumbs Also See for Headset 730:

Table of Contents

Your Headset

Use the 3.5 mm Audio Cable

Use the included 3.5 mm audio cable to connect your headset with your laptop or mobile device. You can use

the audio cable to connect to a non-wireless device or if your headset battery is low.

Note

You can't control calls or music playback when you use the 3.5 mm cable. Any connected Bluetooth sources

will have priority over the 3.5 mm audio connection.

Procedure

Step 1

Plug the 3.5 mm audio cable into the port at the bottom of the left ear cup.

Step 2

Insert the other end of the cable into the 3.5 mm jack on your device.

When you power on your headset, a voice notification announces your remaining battery charge. Your headset

notifies you when you have less then an hour of talk time remaining.

Note

Voice notifications are turned on by default. You can toggle your headset voice notifications in the Cisco

Headsets mobile app.

If you have firmware version 1-7-0-138 or later, your headset automatically shuts down after six hours of

inactivity to conserve battery power.

Use the 3.5 mm Audio Cable

Cisco Headset 730 User Guide

Table of Contents