Cisco Headset 730 User Manual page 20

About Audio Notifications
Table 4: Headset Audio Notifications
Action
The headset battery has more than 15 hours of talk time.
The headset battery has less than 15 hours of talk time.
You have an incoming call.
You press the Mute button while on a call.
You unmute your headset while on a call.
You speak while your headset is muted on a call.
Your headset connects with a Bluetooth source
Your headset disconnects from the first Bluetooth source
You hold the Play button without an active call.
You hold the Play button to deactivate the Presence LED
light.
You reject a call with the Call button.
The headset is in pairing mode.
You turn the headset on.
You turn the headset off.
You are erasing all Bluetooth devices.
You erase the headset Bluetooth memory.
Your headset connects to a Cisco IP Phone
Your headset disconnects from a Cisco IP Phone
Your headset connects to the USB Adapter
Your headset disconnects from the USB Adapter
Your headset connects to a computer
Your headset disconnects from a computer
Your headset connects to a mobile phone
Your headset disconnects from a mobile phone
Your headset connects to an unknown device
Cisco Headset 730 User Guide
14
Audio Prompt
"Battery charge: high."
"You have [X] hours of talk time remaining.
"You have an incoming call."
"Muted."
"Unmuted."
"You are muted."
"Connected."
"Disconnected."
"Busy Light on."
"Busy Light off."
"Call rejected."
"Pairing mode. Look for Cisco Headset 730 in
your list of Bluetooth devices."
"Headset on."
"Headset off."
"Keep holding the Bluetooth button to erase all
Bluetooth device records."
"Bluetooth records erased."
"Desk phone connected"
"Desk phone disconnected"
"Cisco USB Adapter connected"
"Cisco USB Adapter disconnected"
"Computer connected"
"Computer disconnected"
"Mobile phone connected"
"Mobile phone disconnected"
"Device connected"
Your Headset