Use The 3.5 Mm Audio Cable; Headset Power; Charge Your Headset With The Usb-C Cable - Cisco 730 User Manual

Your Headset

Use the 3.5 mm Audio Cable

Use the included 3.5 mm audio cable to connect your headset with your laptop or mobile device. You can use
the audio cable to connect to a non-wireless device or if your headset battery is low.
Note
You can't control calls or music playback when you use the 3.5 mm cable. Any connected Bluetooth sources
will have priority over the 3.5 mm audio connection.
Procedure
Step 1
Plug the 3.5 mm audio cable into the port at the bottom of the left ear cup.
Step 2
Insert the other end of the cable into the 3.5 mm jack on your device.

Headset Power

Charge Your Headset with the USB-C Cable

Use the included USB-C cable to charge your headset. It takes about 2.5 hours to fully charge the headset.
Procedure
Step 1
Insert the USB-C cable into the USB-C charging port at the bottom of the left ear cup.
Use the 3.5 mm Audio Cable
Cisco Headset 730 User Guide
9