Use The 3.5Mm Audio Cable; Charge Your Headset; Charge Your Headset With The Usb-C Cable - Cisco Headset 730 User Manual

Your Headset

Use the 3.5mm Audio Cable

Use the included 3.5mm audio cable to connect your headset with your laptop or mobile device. You can use
the audio cable to connect to a non-wireless device or if your headset battery is low. Any connected Bluetooth
sources will have priority over the 3.5mm audio connection.
Procedure
Step 1
Plug the 3.5mm audio cable into the port at the bottom of the left ear cup.
Step 2 Insert the other end of the cable into the 3.5mm jack on your device.

Charge Your Headset

Charge Your Headset with the USB-C Cable

Use the included USB-C cable to charge your headset. It takes about 2.5 hours to fully charge the headset.
Procedure
Step 1 Insert the USB-C cable into the USB-C charging port at the bottom of the left ear cup.
REVIEW DRAFT - CISCO CONFIDENTIAL
Use the 3.5mm Audio Cable
Cisco Headset 730 User Guide
7