System Display Users (Login, Logout, Password) - Honeywell enCore Series Manual

7
7.3.6

System display Users (login, logout, password)

The user management only has one pre-defined display (Main display) for logging
in and out of the device as users and rights are managed in enSuite. After a
successful local login, the actions to accept or discard the parameter changes and
to log out are displayed. In addition to this, the user who is logged in can change
their password.
Main display
Access: Home –
Display view – status: no user logged in to the device
User name
Password
Login
Remote operation panel active
GasLab Q2
System – User
Fig. 7-25: Main display – Logging in to the device
(Status: no local or remote user logged in)
<Name>
Field pre-assigned with the name of the last login.
If necessary, change the pre-assigned user name.
[******]
For security reasons, in the display each character in the pass-
word is replaced by an asterisk (*); the field can also be empty.
Action for log in to the device (user details set fields before)
After this action the display changes the appearance
Logout (p. 136)
➪
This warning is always shown when a user has access to the
device's operation panel via remote connection and the remote
user has enabled the local user to view the device. In this case,
the following symbol is displayed locally in the status bar:
Otherwise, the local user sees a lock screen.
User Manual (N )
GasLab Q2 operation panel and operation
134 of 315