Honeywell enCore Series Manual page 209

8
(1) Erasing the fiscal audit trail
The fiscal audit trail has a maximum depth of 1,000 entries. As soon as the
fiscal audit trail is full, no more parameter with the access right
changed if the security switch is closed – not until the fiscal audit trail has
been deleted.
Access in enSuite (navigation branch)
My devices – <Device> –
OR
My devices – <Device>
Access on the device
System –
trail
(2) Clearing fiscal archives
Action "Modify displays"
Transferring parameterization with changed displays to the device. Pre-
defined standard displays can be changed if they are not read-only; read-only
displays are labeled with a lock
edited or deleted.
Access in enSuite (navigation branch)
Displays –<Folder> – [Folder – ] <Display(s)>
Action "Update device time"
Set internal system time in the device.
Access in enSuite (navigation branch)
My devices –<Device> –
Access on the device
System – Time Service –
– ],
Update date and time
Action "Reset battery state"
Display of the battery state of charge on the enCore device, e.g., reset to 100%
after changing the batteries.
1
The Time Service distinguishes between synchronization and adjustment of the system time.
enCore manual "Basic System with SFBs"
➪
GasLab Q2
Configuration and analysis software enSuite
Erase fiscal audit trail
–End of commissioning
< Audit trail> , select entry Fiscal ,
(DSfG AFB only)
User-defined displays can also be created,
Update date and time
Date and time
User Manual (N )
Erase fiscal audit
1
– [
Update date and time
can be
209 of 315