RIDGID SeekTech SR-60 Operator's Manual page 6

SeekTech SR-60
SR-60 Use and Care
Use equipment only as directed. Do not operate the
SR-60 unless you have read the operator's manual.
Do not immerse the antennas in water. Store in a
dry place. This will reduce the risk of electric shock and
instrument damage.
Store idle equipment out of the reach of children
and other untrained persons. Equipment is danger-
ous in the hands of untrained users.
Maintain the instrument with care. Properly main-
tained diagnostic instruments are less likely to cause
injury.
Check for breakage of parts, and any other condi-
tions that may affect the SR-60's operation. If dam-
aged, have the instrument serviced before using. Many
accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the
manufacturer for the SR-60. Accessories that may be
suitable for one instrument may become hazardous
when used on another.
Keep handles dry and clean, and free from oil and
grease. Allows for better control of the instrument.
Protect against excessive heat. The product should
be situated away from heat sources such as radiators,
heat registers, stoves, or other products that produce
heat.
Service
Diagnostic instrument service must be performed
only by qualified repair personnel. Service or main-
tenance performed by unqualified repair personnel
could result in injury.
When servicing a diagnostic instrument, use only
identical replacement parts. Follow instructions in
the maintenance section of this manual. Use of unau-
thorized parts or failure to follow maintenance instruc-
tions may create a risk of electrical shock or injury.
4
Follow instructions for changing accessories. Ac-
cidents are caused by poorly maintained equip ment.
Provide proper cleaning. Remove battery before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Conduct a safety check. Upon completion of any serv-
ice or repair of this product, ask the service technician
to perform safety checks to determine that the product
is in proper operating condition.
Damage to the product that requires service. Remove
the batteries and refer servicing to qualified service
personnel under any of the following conditions:
·
·
·
·
Remove batteries entirely before shipping.
Ridge Tool
For information on your nearest RIDGID Independent Service
Center or any service or repair questions:
RIDGID contact point.
services@emerson.com, or in the U.S. and Canada call (800)
519-3456.
Ridge Tool Company
If liquid has been spilled or objects have fallen into
product.
If product does not operate normally by following
the operating instructions.
If the product has been dropped or damaged in
any way.
When the product exhibits a distinct change in
performance.
CAUTION
-