RIDGID SeekTech SR-60 Operator's Manual page 43

Maintenance and Cleaning
1. Keep the SR-60 clean with a damp cloth and some mild de-
tergent. Do not immerse in water.
2. When cleaning, do not use scraping tools or abrasives as
they may permanently scratch the display. NEVER USE
SOLVENTS to clean any part of the system. Harsh chemicals
can cause cracking of the Case.
Locating Faulty Components
For troubleshooting suggestions, please refer to the trouble-shoot-
ing guide on page 46. If necessary, contact RIDGE Tool Technical
Service. We will establish a plan of action to get your SR-60 work-
ing for you.
Service and Repair
IMPORTANT!
Instrument should be taken to a RIDGID Independent
Authorized Service Center or returned to the factory.
Remove batteries before shipping.
All repairs made by Ridge service facilities are warranted
against defects in material and workmanship.
If you have any questions regarding the service or repair of this
machine, call or write to:
Ridge Tool
For information on your nearest RIDGID Independent Service
Center or any service or repair questions:
RIDGID contact point.
services@emerson.com, or in the U.S. and Canada call (800)
519-3456.
Remove batteries entirely before shipping.
For EC countries: Defective or used battery packs/batteries
must be recycled according to the guideline 2006/66/EEC.
Ridge Tool Company
SeekTech SR-60
CAUTION
For EC Countries: Do not dispose of electrical
equipment with household waste! According
to the European Guideline 2002/96/EC for
Waste Electrical and Electronic Equipment
and its implementation into national legisla-
tion, electrical equipment that is no longer
usable must be collected separately and
disposed of in an environmentally correct
manner.
-
41