4
Enter the TeraStation's IP address in the "IP address or DNS name" field.
5
Click Advanced.
6
Select the "Enable CHAP log on" checkbox and enter the target CHAP name into the "Name" field and the
target CHAP secret into the "Target secret" field.
If mutual authentication is enabled, select the "Perform mutual authentication" checkbox.
7
Click OK, then click OK again.
8
From the "Targets" tab, select the volume from "Discovered targets" and click Connect.
9
Click Advanced.
10
Select the "Enable CHAP log on" checkbox and enter the target CHAP name into the "Name" field and the
target CHAP secret into the "Target secret" field.
If mutual authentication is enabled, select the "Perform mutual authentication" checkbox.
11
Click OK, then click OK again.
12
If the status of the selected volume is displayed as "Connected" under "Discovered targets", the connection is
established properly.
Accessing the access-restricted volume is finished.
Using Buffalo iSCSI Connection Tool
1
Open the Buffalo iSCSI Connection Tool.
70