Table of Contents
Advertisement
2
Click
to the right of "WebAccess Remote".
3
Click Edit.
4
From "Target Folder", select the shared folder that will be connected.
Note: The selected folder is used internally by "WebAccess Remote". Files are not added to this folder and the
amount of used space does not increase.
5
You may choose to enter a BuffaloNAS.com name or an external DNS/IP address. If using a BuffaloNAS.com
name, it should be the same BuffaloNAS.com name assigned to the source TeraStation. If using an external
DNS/IP address, enter either the IP address of your DNS server or the global IP address of the remote
TeraStation's WebAccess.
6
Enter the remote TeraStation's WebAccess username and password.
7
Click OK.
8
Move the WebAccess Remote switch to the
9
You can directly access the shared folder in the remote TeraStation by entering the path displayed in "Target
Folder" into the address bar in File Explorer or another file manager program.
Notes:
• If using after the network has been temporarily disconnected, click Remount.
• Do not copy more than 100,000 files at once to the WebAccess Remote target folder. If copying fails, try again
with fewer files.
• Be careful with existing files in the target folder, as files with the same name will be overwritten even if copied
files are older.
position to enable WebAccess Remote.
110
Advertisement
Table of Contents
