Table of Contents
Advertisement
Levels
Daily Report
Info
Notice
Error
Sleep Mode
To save energy, you can specify times to put the TeraStation into sleep (standby) mode, during which the hard drive
and LEDs are turned off.
1
In Settings, click Management.
2
Click
to the right of "Sleep Timer".
3
Click Edit.
Details
Describes the status of the TeraStation in a daily report email.
Sends a notification email if an event occurs. Info reports will contain
just information such as capacity information, job starts/finishes, etc.
Sends a notification email if a non-critical error occurs. Notice reports
will contain warnings such as something has failed, but the function
or unit can continue operating as usual. It is recommended to do the
corrective action for the notice as soon as possible.
Sends a notification email if a critical error occurs. Error reports
will describe critical failure which prevents a function or unit from
operating. It is recommended to do the corrective action to for the error
immediately.
180
Advertisement
Table of Contents
