Table of Contents
Advertisement
3
Right-click the disk volume that shows the status "Unallocated" and click New Simple Volume from the
displayed menu. Follow the screen to finish formatting.
Formatting a volume is finished. When the formatting process is completed, the drive will be visible as an icon in
Computer or My Computer and can be used as a normal drive on the computer.
Disconnecting a Volume
1
In Windows, navigate to Control Panel - System and Security - Administrative Tools - iSCSI Initiator.
The status of the connecting volume will be displayed as "Connected" under "Discovered targets".
2
Select a volume to disconnect and click Disconnect.
3
Click Yes.
4
When the volume status is displayed as "Inactive", the disconnection was carried out properly.
Using Buffalo iSCSI Connection Tool
Connecting a Volume
To connect a volume using Buffalo iSCSI Connection Tool from a Windows computer, follow the procedure below.
1
Click Start - Programs - Buffalo - iSCSI Connection Tool - iSCSI Connection Tool.
iSCSI Connection Tool will open.
60
Advertisement
Table of Contents
