Chapter 11 Utilities
NAS Navigator2 for Windows
NAS Navigator2 is a utility program that makes it easy to display Settings, change the TeraStation's IP address,
or check its hard drive. If you installed the TeraStation with the TeraNavigator, NAS Navigator2 was installed
automatically.
Double-click the
Click on a TeraStation's icon to display:
• Total capacity
• Used capacity
• Workgroup
• IP address
• Subnet mask
• Default gateway
• MAC address
• Firmware version
Double-click it to open a share on the TeraStation.
icon to start NAS Navigator2.
222