Table of Contents
Advertisement
Name
LinkStation or
TeraStation Name
Refresh
Open NAS Navigator2
Exit
The following tasks may be performed from the LinkStation's or TeraStation's properties page.
Name
Configuration
IP Address
Browse Shares
Settings
Properties
Map Share
Disconnect Share
Create Shortcut
I'm here
Description
Click Settings to open the configuration interface.
Select the "Use DHCP" checkbox to assign an IP address from the DHCP server
automatically. If there is no DHCP server on the network, you cannot use this
function.
Select the "Renew IP address" checkbox to obtain an IP address from the DHCP
server.
You can manually enter an IP address, subnet mask, and default gateway.
Description
Opens the selected LinkStation's or TeraStation's shared
folders.
Opens Settings for the selected LinkStation or TeraStation.
Opens the selected LinkStation's or TeraStation's properties
page.
Assigns the LinkStation's or TeraStation's shared folder as a
network drive.
Unmaps the network drive.
Creates a desktop shortcut to the selected LinkStation's or
TeraStation's shared folders.
Causes your TeraStation to beep.
Refreshes list of NAS devices.
Opens the NAS Navigator2 window.
Exits NAS Navigator2.
224
Advertisement
Table of Contents
