Table of Contents
Advertisement
• TeraStations, LinkStations, and SMB-compatible Windows computers can be specified as DFS link targets (macOS
and Linux are not supported).
Accessing from an NFS Client
Note: (US customers only) Buffalo's customer support will help configure the NFS settings on your TeraStation, and
will support VMware and Windows clients but will not provide support for configuring your Linux or other UNIX
clients. There are many types of UNIX and the procedures for configuring NFS with them will vary considerably.
For help configuring your NetWare, Linux, or other UNIX clients for NFS support, please consult each client's own
documentation and support.
1
In Settings, click File Sharing.
2
Click
to the right of "Folder Setup".
3
Choose the shared folder that will be accessible from the NFS client.
4
Click Edit.
5
Under "LAN Protocol Support", select the "NFS" checkbox and click OK.
Note the NFS path. It will be used later for accessing data from an NFS client.
6
Click Close.
7
Move the NFS switch to the
8
Click
to the right of "NFS".
position to enable NFS.
191
Advertisement
Table of Contents
