Table of Contents
Advertisement
3
Click the Source tab and select the TeraStation where the recorded video data is saved under "Vault".
Note: If "any" is selected, recorded data for all TeraStations connected to the network will be backed up. Click
the Destination tab, then select the TeraStation where you want to move the data from "Vault".
4
Set the job execution date and time from the Scheduling tab. In this example, to execute the backup job every
hour, select "Repeatedly at a defined interval" and "Every 1 hour".
5
Click
and register the policy.
This completes the settings for backing up video to another TeraStation.
Automatically Delete Old Data when Space is Low
Follow the procedure below to delete (purge) recorded video starting from the oldest when available space for
recording video becomes low.
Note: By default, old video data will be deleted automatically when 80% of available space is used. Old data will be
removed at the same rate as new video is added, so there will always be enough video to fill about 80% of the total
available space. To disable this setting, remove the "Remove Old Video" policy from "Data Service Policies".
1
Click Start - BUFFALO - BUFFALO Surveillance Server - Data Service Policies.
For Windows 8.1 and Windows 8, click Data Service Policies in the Start menu.
2
Click
and when the Create a Policy screen is opened, enter "PurgeTest" into the "Policy Name" field, select
"Purge", and click OK.
153
Advertisement
Table of Contents
