Table of Contents
Advertisement
(6) Click OK when finished.
2
Click Backup.
3
Click
to the right of "Failover".
4
Click Edit Failover Status.
5
Click Force Failover to Stop to cancel the failover settings.
6
Shut down this main TeraStation.
7
Turn the backup TeraStation on.
8
Log in to Settings for the backup TeraStation, then rename the TeraStation's hostname and configure the IP
address so that it has a new static IP address.
9
Power on the main TeraStation. If you want to configure the UPS sync on the backup TeraStation, configure the
settings here. Otherwise, skip to the next step.
To sync with the UPS device connected to the main TeraStation, follow the procedure below on the backup
TeraStation.
(1) Click Management.
100
Advertisement
Table of Contents
