Patrol; Figure 40 Patrol Settings - Honeywell 35 Series User Manual

FOCUS: Click
IRIS: Click
Speed [1-8]: Select the movement speed for camera view. The speed range is 1 to 8 and
the default setting is 5.
Scan Management
Add scan: Set the scan ID and name. Click START to start record. Click END to end
record.
Click

 Click
Click


Patrol

Go to Setup  PTZ Setup  Patrol.

Figure 40 Patrol Settings

and click
ZOOM: Click
FOCUS: Click
IRIS: Click
Speed [1-8]: Select the movement speed for camera view. The speed range is 1 to 8 and
the default setting is 5.
Honeywell 35 Series IP Cameras User Guide
and to adjust the Focus setting.
and to adjust the IRIS setting.
to start this scan.
to stop the scan setting.
to remove the scan.
: Click the buttons to move the video image up/right/down/left/45-degree tilt
to return to the home location.
to zoom out the video image, or click
and to adjust the Focus setting.
and to adjust the IRIS setting.
to zoom in the video image.
61