Figure 2-6 Gimbal Adjustment - Honeywell HD54IP User Manual

Top view
Setscrew (loosen to
adjust horizontal
rotation)
Set focal length
(bottom)
Set focus
(top)
TECH TIP!
Document 800-09311V3 Rev A
07/2013
Performance Series Rugged Day/Night H.264 IP Dome Camera User Guide
Caution Adjust the camera field of view only by moving the gimbal. Do not
move the camera lens to adjust the camera field of view as this might
result in irreparable damage.
Figure 2-6 Gimbal Adjustment
Local video out
Factory reset
button
Loosen locking screw
(inside conduit entry)
to remove the side
conduit plug.
Adjusting the Lens Focus
Lenses are pre-focused at the factory. They might require a final adjustment after
installation in the unlikely event the optical effect of the dome bubble causes a slight
defocusing of the lens.
To check the focus, hold the dome bubble over the lens while making any adjustments.
Angle view
B
C
A
Legend
A = Tilt rotation
B = Horizontal rotation
C = Pan rotation
27