General Conditions; Bacnet Link; Tcp And Udp Service Ports; Open Source Licenses - ABB FBIP-21 BACnet/IP User Manual

54 Technical data

General conditions

Installation
Degree of protection
Ambient conditions
Package
Indicators
Connectors
Power supply
Compliance

BACnet link

Compatible devices
Medium
Topology
Transfer rate
Serial communication
type
Protocol

TCP and UDP service ports

There are multiple in-bound and out-bound network services running on the FBIP-21.
Port
68 (UDP)
47808 (UDP)

Open source licenses

IwIP is licensed under the BSD license. Copyright (c) 2001-2004 Swedish Institute of
Computer Science. All rights reserved.
Into an option slot on the drive control unit
IP20
The ambient conditions specified for the drive in its manuals are applicable.
Cardboard. Plastic wrapping: Antistatic air bubble sheet (PE).
Three bicolor LEDs (HOST, MODULE, NETWORK/NET)
A 20-pin connector to the drive
RJ-45 connector to Ethernet (X1)
RJ-45 connector for chaining another adapter module (X2)
+3.3 V ±5% max. 400 mA (supplied by the drive)
Complies with EMC standard EN 61800-3:2004
Printed circuit board conformal coated
Ethernet Standard IEEE 802.3 and IEEE 802.3u devices
10BASE-TX or 100Base-TX with Autonegotiation and Auto-MDIX (Auto-cros-
sover)
• Wiring: CAT5/6 UTP, CAT5/6 FTP, CAT5/6 STP
• Connector: RJ-45
• Termination: Internal
• Maximum segment length: 100 m / 328 ft
Bus or star.
Max. 50 nodes allowed for FBIP-21 in a daisy chain topology.
10 Mbps or 100 Mbps.
Half or full duplex
BACnet/IP
Service
DHCP
BACnet
Purpose
DHCP client.
Note: Used only when IP configuration
method is selected as Dyn IP HFCP.
BACnet IP protocol.