Introduction to the manual
Contents of this chapter
This chapter introduces this manual.
Applicability
This manual applies to the FBIP-21 BACnet/IP adapter module, SW version 2.0 and
later.
Compatibility
The FBIP-21 fieldbus adapter module is compatible with the following drives and
protocols:
Drives
ACH480, ACH580, ACH580 E-Clipse bypass
Protocols
• Ethernet standards IEEE 802.3 and IEEE 802.3u
• All BACnet/IP clients that support protocol version 1, revision 14.
Target audience
This manual is intended for people who plan the installation, install, start up, use and
service the module. Before you do work on the module, read this manual and the
applicable drive manual that contains the hardware and safety information for the
product in question. You are expected to know the fundamentals of electricity, wiring,
electrical components, and electrical schematic symbols.
Introduction to the manual 11
2