Mechanical installation
Contents of this chapter
This chapter contains a delivery checklist and instructions on installing the module.
Necessary tools and instructions
You will need a Torx TX10 screwdriver to secure the FBIP-21 BACnet adapter module
to the drive. See also the drive hardware manual.
Unpacking and examining the delivery
1.
Open the option package.
2.
Make sure that the package contains:
•
BACnet adapter module, type FBIP-21 and
•
quick guide.
3.
Make sure that there are no signs of damage.
Before you start
The adapter module has a specific position in the drive. Plastic pins, a lock and one
screw hold the module in place. The screw also makes an electrical connection between
the module and drive frame for cable shield grounding.
When the module is installed, it makes the signal and power connection to the drive
through a 20-pin connector.
Mechanical installation 19
4
10