ABB FBIP-21 BACnet/IP User Manual page 28

28 Start-up
No. Name/Value Description
0...65535 Drive type code of the fieldbus adapter module mapping file
30 FBA Mapping Displays the fieldbus adapter module mapping file revision stored
file ver in the memory of the drive in decimal format.
This parameter is read-only.
0...65535 Mapping file revision
31 D2FBA comm Displays the status of the fieldbus adapter module communication.
status
This parameter is read-only.
Note: The value names may vary by drive.
0 = Idle Adapter is not configured.
1 = Exec.init Adapter is initializing.
2 = Time out A timeout has occurred in the communication between the adapter
and the drive.
3 = Conf.err Adapter configuration error
4 = Off-line Adapter is off-line.
5 = On-line Adapter is on-line.
6 = Reset Adapter is performing a hardware reset.
32 FBA comm SW Read-only. Displays the firmware patch and build number of the ad-
ver apter module in format xxyy, where:
xx = patch number
yy = build number.
Example: C80D ≥ 200.13 or 0 ≥ 0.0
0..0xFFFF Firmware patch and build number of the adapter module
33 FBA appl SW ver Read-only. Displays the firmware version of the adapter module in
format xxyy, where:
xx = major revision number
yy = minor revision number.
Example: 0041h = 0.41
Version number is in the form:
<major>,<minor>,<patch>,<build>
Example: 0.41.200.6 or 0.41.0.0
0..0xFFFF Firmware version of the adapter module
Default
0
0 = Idle
0 hex
0 hex