Configuring Streaming Protocols; Figure 51 Manually Setup Ip Address; Figure 52 Streaming Protocols - Http - Honeywell 30 Series Manual

If you have a Secondary HTTP port (the default value is 8080), you can also link to
Note: the webpage using the following address format: (see
Protocols
Manually setup the IP address: Check to manually set up IPv6 settings if your network
environment does not have DHCPv6 server and router advertisements-enabled routers.
If you check this item, the following blanks will be displayed for you to enter the
corresponding information:

Figure 51 Manually Setup IP Address

Configuring Streaming Protocols

Go to SetupNetwork SetupStreaming Protocols.

Figure 52 Streaming Protocols - HTTP

To utilize HTTP authentication, make sure that you have set a password for the camera
first. For more information, see
Authentication (digest): User credentials are encrypted with MD5 algorithm which
provide better protection against unauthorized accesses.
HTTP port: By default, the HTTP port is set to 80. It can also be assigned to another port
number between 1025 and 65535.
44
on page 44 for detailed information.)
Configuring User Accounts Settings
Configuring Streaming
Honeywell 30 Series IP Cameras User Guide
on page 82.