Account Management; Configuring Access List Settings; Figure 96 Account Management - Honeywell 30 Series Manual

Account Management

Figure 96 Account Management

The administrator account name is admin, which is permanent and cannot be deleted.
The administrator can create up to 20 user accounts.
To create a new user:
1. Select New user from the drop-down list.
2. Enter the new user's name and password and confirm the password. Set the new
password according to the password requirements (see
3. Select the privilege level for the new user account. Click ADD to enable the setting.
The privilege levels are listed below:
Role
Administrator
Viewer
Access rights are sorted by user privilege (Administrator, Operator, and Viewer). Only
administrators can access the Configuration page. Viewers can only access the main
page for live viewing.
To change a user's access rights or delete a user account:
1. Select an existing account to modify.
2. Make necessary changes and click UPDATE or DELETE to enable the setting.

Configuring Access List Settings

Go to Setup  System Setup  Access List.
This section describes how to control access permission by verifying the client PC's IP
address.
Honeywell 30 Series IP Cameras User Guide
Privilege
Full control
Live, Language
Figure 96).
83