Testing Inbound Calls For T1 Cas, T1 Pri, And E1 Telephony By Using A Dialing Sequence; Testing Outbound Calls For T1 Cas, T1 Pri, And E1 Telephony - Cisco 700 MHz Installation And Upgrade Manual

Testing Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by Using a Dialing Sequence

When you hear the prompt "Welcome to MeetingPlace," press 2. The Cisco Unified MeetingPlace
Step 5
system replies with "Enter your profile number." This verifies a full two-way connection between the
PBX and central office.
Step 6 Dial the Cisco Unified MeetingPlace system access number until each port is tested.
Testing Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by
Using a Dialing Sequence
To Test Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by Using a Dialing Sequence
Step 1 Ask the PBX administrator for the dialing sequence that controls which port picks up the call.
For each port, press 2 and listen for the "Enter your profile number" prompt. This ensures a full two-way
Step 2
connection between the PBX and central office.
Tip

Testing Outbound Calls for T1 CAS, T1 PRI, and E1 Telephony

If Cisco Unified MeetingPlace is connected to a PBX, test outbound calls placed to extensions on the
PBX and calls placed to the public network. Make a call on each port. Test outbound calls on PSTN
connections, too.
To Test Outbound Calls for T1 CAS, T1 PRI, and E1 Telephony
Step 1 Access the CLI. If you do not already have terminal logging turned on, turn it on.
Step 2 Enter activity. The following example appears:
meetingplace:tech$ activity
VUI Configuration: 1152 Sessions, 1200 Confs
***
DebugMenu:
1) Quick Status of all Ports
2) Verbose Status of Port Range
3) Display complete Port Information
Enter the Command
To make a test call, enter 4. The Cisco Unified MeetingPlace system prompts you for a destination phone
Step 3
number.
meetingplace:tech$ activity
VUI Configuration: 1152 Sessions, 1200 Confs
***
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
5-4
Chapter 5 Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade
We recommend that the PBX hunt from the highest port to the lowest port.
VUI INTERNAL STATUS
(0 -- 100):
VUI INTERNAL STATUS
UTILITY ***
4) Make Test Call
5) Show All Confs
0) Quit
UTILITY ***
OL-13417-01