Mounting The Cisco Unified Meetingplace 8112 Into A 19- Or 23-Inch Eia Equipment Rack - Cisco 700 MHz Installation And Upgrade Manual

Mounting the Cisco Unified MeetingPlace 8100 Series
Figure 2-3
Mounting the Cisco Unified MeetingPlace 8112 into a 19- or 23-Inch EIA
Equipment Rack
In a 19- or 23-inch EIA equipment rack, you mount the Cisco Unified MeetingPlace 8112 on the front
rails.
To Mount the Cisco Unified MeetingPlace 8112 into a 19- or 23-Inch EIA Equipment Rack
If you are installing the Cisco Unified MeetingPlace 8112 in a 19-inch rack, you do not need any
Step 1
additional mounting equipment. Skip to
If you are installing the Cisco Unified MeetingPlace 8112 in a 23-inch rack, you must obtain extension
brackets from the rack manufacturer. Install the optional extender brackets as described by the rack
manufacturer.
Step 2 Slide the Cisco Unified MeetingPlace 8112 into the front of the rack.
Step 3 Attach the Cisco Unified MeetingPlace 8112 to the rack with the eight Phillips-head screws that shipped
with the Cisco Unified MeetingPlace 8112. See
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
2-6
Chapter 2
Mounting the Cisco Unified MeetingPlace 8106 in an EIA Equipment Rack
Step
Installing the Cisco Unified MeetingPlace 8100 Series Hardware
2.
Figure 2-4.
OL-13417-01