Testing Conferencing In Recorded Meetings; Testing Conferencing In Nonrecorded Meetings With Ad Hoc Recording; Testing Cisco Unified Meetingplace Web Conferencing - Cisco 700 MHz Installation And Upgrade Manual

Testing Conferencing in Recorded Meetings

To Test Scheduling
Step 1 Confirm that you can schedule a new meeting.
Step 2 Confirm that you can attend the new meeting.
Step 3 If the Cisco Unified MeetingPlace notification option is enabled, confirm that you can receive
notifications when meetings are scheduled.
Testing Conferencing in Recorded Meetings
Do the following procedure if the Cisco Unified MeetingPlace Audio Server system is configured for
recordings.
To Test Conferencing in a Recorded Meeting
Step 1 Schedule a recorded meeting.
Step 2 Confirm that the meeting was recorded.
Step 3 Confirm that you can retrieve the meeting recording after the meeting.
Testing Conferencing in Nonrecorded Meetings with Ad Hoc
Recording
Do the following procedure if the Cisco Unified MeetingPlace Audio Server system is configured for
recordings.
To Test Conferencing in a Nonrecorded Meeting with Ad Hoc Recording
Schedule a meeting without recording.
Step 1
Attend the meeting and activate the recording by pressing #61.
Step 2
Confirm that the meeting was recorded.
Step 3
Confirm that you can retrieve the meeting recording after the meeting.
Step 4

Testing Cisco Unified MeetingPlace Web Conferencing

If Cisco Unified MeetingPlace Web Conferencing is installed, refer to the Installation and Upgrade
Guide for Cisco Unified MeetingPlace Web Conferencing at
http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html
perform a functional check.
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
5-6
Chapter 5 Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade
to
OL-13417-01