Chapter 1
Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware
Figure 1-3
E1 Euro ISDN
Modem Requirements for Cisco Unified MeetingPlace Systems
The Cisco Unified MeetingPlace 8100 series includes an external modem that connects to the Cisco
Unified MeetingPlace system through a serial cable. Connect the modem cable from the back of the
Cisco Unified MeetingPlace 8100 series to the CPU transition module.
Confirm that you can call the modem extension from the outside so that Cisco TAC can access the Cisco
Unified MeetingPlace system.
Table 1-7
Table 1-7
Country
U.S.
Canada
Hong Kong
OL-13417-01
Cisco Unified MeetingPlace Digital Connection Requirements—E1
PSTN
Customer-supplied
Network
interface unit
(NIU)
lists modem requirements by country for a Cisco Unified MeetingPlace system.
Modem Requirements by Country
Requirements
U.S. modem supplied by Cisco Systems.
•
Serial cable.
•
6-foot modem cable.
•
Customer-supplied standard analog phone jack (RJ-11). You must be able
•
to call the extension from the outside.
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
Modem Requirements for Cisco Unified MeetingPlace Systems
RJ-45 connectors
Special 23 ft cable
shipped with unit
T1 Smart Blade
PBX
E1 Euro ISDN
QSIG
Channel
service unit
(CSU)
(optional)
Cisco Unified MeetingPlace
Audio Server system
1-11