Connecting The Telephony Cables For A T1 Cas/Ip Cisco Unified Meetingplace System - Cisco 700 MHz Installation And Upgrade Manual

Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
Figure 2-28
Connecting the Telephony Cables for a T1 CAS/IP Cisco Unified MeetingPlace
System
To Connect the Telephony Cables for a T1 CAS/IP Cisco Unified MeetingPlace System
Locate the following items that shipped with the Cisco Unified MeetingPlace Audio Server:
Step 1
•
•
Step 2 Attach the far end of the first T1 CAS telephony cable to the equipment that will connect with Cisco
Unified MeetingPlace.
In many cases, the other equipment has an RJ-48c socket in which to plug the T1 CAS telephony cable.
Alternately, the other equipment will be connected to a punchdown block. In this case, you will need to
determine the block's connection diagram and then connect to it with discrete wires from the cable.
OL-13417-01
Back of Cisco Unified MeetingPlace 8112 (Mixed Configuration with 480 E1 and 480
IP Ports)
IP LAN cables.
T1 CAS telephony cables.
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems
2-35