Contents Of Shipped Boxes For The Cisco Unified Meetingplace Audio Server System - Cisco 700 MHz Installation And Upgrade Manual

Installing the Cisco Unified MeetingPlace 8100
Series Hardware
This chapter contains the following sections:
•
•
•
•
•
•
•
Contents of Shipped Boxes for the Cisco Unified MeetingPlace
Audio Server System
All Cisco Unified MeetingPlace Audio Server systems ship in two boxes. One box contains the Cisco
Unified MeetingPlace Audio Server and its accessories. The other box contains the telephony cables,
modem and modem cables, and the breakout box and cables, if applicable.
Cisco Systems provides the correct number of telephony cables for the Cisco Unified MeetingPlace
system:
•
•
OL-13417-01
Contents of Shipped Boxes for the Cisco Unified MeetingPlace Audio Server System, page 2-1
Mounting the Cisco Unified MeetingPlace 8100 Series, page 2-3
Connecting the Cables to the Cisco Unified MeetingPlace 8100 Series, page 2-10
About Telephony Configurations for E1 and T1 PRI Cisco Unified MeetingPlace Systems,
page 2-15
About Telephony Configurations for IP Cisco Unified MeetingPlace Systems, page 2-27
About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems, page 2-30
Installing and Connecting the Modem, page 2-36
The number of IP LAN cables that you receive depends on the number of ports that were purchased
for the Cisco Unified MeetingPlace system. You receive one IP LAN cable for every Multi Access
Blade in the Cisco Unified MeetingPlace system.
The number of T1 CAS telephony cables that you receive depends on the number of ports that were
purchased for the Cisco Unified MeetingPlace system. You receive one T1 CAS telephony cable for
every 24 PSTN ports being activated.
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
2
C H A P T E R
2-1