Setting Up Dial-Up Networking; Testing The Modem Connection - Cisco 700 MHz Installation And Upgrade Manual

Setting Up Dial-Up Networking

Setting Up Dial-Up Networking
This section explains how to set up dial-up networking on a Microsoft Windows 2000 operating system
to connect to the Cisco Unified MeetingPlace Audio Server system by using a modem.
To Set Up Dial-Up Networking
On the Windows 2000 system, right-click the My Network Places icon on the desktop.
Step 1
Select Properties.
Step 2
Double-click Make New Connection. The Network Connection Wizard dialog box opens.
Step 3
Click Next. The Network Connection Type dialog box appears.
Step 4
Select Dial-up to Private Network, and click Next. The Network Connection Wizard dialog box
Step 5
appears.
(If you have more than one dial-up device on your computer, you may not see this dialog box at this
time. Instead you may see a dialog box asking you to choose a dial-up device. Choose the dial-up device
that you want to use and press Next. The Network Connection Wizard dialog box appears.)
Step 6 Enter the phone number of the Cisco Unified MeetingPlace Audio Server modem in the phone number
field and click Next. The Connection Availability dialog box appears.
Step 7 Select For all users. Click Next. The Completing the Network Connection Wizard dialog box appears.
Step 8 In the Type the Name You Want to Use for This Connection field, enter the company name.
Step 9 Click Finish. The Connection dialog box appears.
Click Properties. The Connection Properties dialog box appears.
Step 10
Select the General tab.
Step 11
Click Configure. The Modem Configuration dialog box appears.
Step 12
Change the maximum speed to 19200 bps.
Step 13
Click OK. The Connection Properties dialog box appears.
Step 14
Click the Networking tab.
Step 15
Step 16 Under "Type of dial-up server I am calling," select SLIP: Unix Connection.
Step 17 Under "Components checked are used by this connection," select Internet Protocol (TCP/IP).
Step 18 Click Properties. The Internet Protocol (TCP/IP) Properties dialog box appears.
Step 19 Select Use the Following IP Address, and enter 198.207.208.242 in the IP address field.
Step 20 Click OK to exit the Properties window.
Step 21 Click OK to exit the networking window. Your connection is now complete.

Testing the Modem Connection

To Test the Modem Connection
Right-click the My Network Places icon on your desktop.
Step 1
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
3-4
Chapter 3 Connecting and Setting Up Your Laptop Computer
OL-13417-01